Kaleidopete
Well-Known Member
I replaced the bearing and bushing in my Fixyation pedal. It went bad with a knocking sound.
The company has just come out with a repair kit with new axle and bearing kit. They set it to
me free when I contacted them. So today I installed it and it's perfect. The threads on my crank
arm were not perfect making it hard to start the pedal, so I modified the old pedal shaft and ran it
through from the backside of the crank arm thereby cleaning up the threads. I even cut 4 grooves
in the shaft threads to sort of act like a tap. It worked great and the pedal went right in.
special tool # 27 by me
The company has just come out with a repair kit with new axle and bearing kit. They set it to
me free when I contacted them. So today I installed it and it's perfect. The threads on my crank
arm were not perfect making it hard to start the pedal, so I modified the old pedal shaft and ran it
through from the backside of the crank arm thereby cleaning up the threads. I even cut 4 grooves
in the shaft threads to sort of act like a tap. It worked great and the pedal went right in.
special tool # 27 by me
Last edited: