This bike belongs to Chris G
he is having a hard time letting it go.
before we send it out to the internet at large, I thought someone locally might find it dreamy
This bike is a custom geo, but as I know it intimately I’ll comfortably say that it should be a good fit for a rider between 5-9” and 6’. (Results may vary)
king HS and hubs
Enve bar and rims
ergon grips
fizik alliance saddle
KS dropper post
Niner carbon fork
Thompson stem
xt cranks (w / stages power meter) and brakes
I’ve suggested we say $2500 or best offer
Custom GEO chart to follow.
Further specifics/finer details:
*XT brakes; 180mm rotors f/r
*Chris King threaded bottom bracket, black
*ENVE XC29 rims laced to Chris King ISO hubs, pewter
*ENVE flat bar; 780mm width
*KS Lev dropper; modified to use an air-adjustable cartridge
*100mm front/135mm rear spacing
*Thomson stem is 80mm
*Maxxis Ardents 2.4f/2.25r; some life left in these
*Absolute Black 34t narrow wide ring with Wolftooth bolts
*Wolftooth aluminum 19t cog on there presently; I'll pass along a 17t Wolftooth and 18t & 20t Absolute Black aluminum cogs as well
*Ergon GD-1 grips; these are pretty used up
*Fizik Aliante saddle; I use these on all of my bikes; this one is pretty well-used, haha.
Some geometry:
*Head angle is 71.5
*Seat Tube angle is 72
*Top Tube length is 24.54"
*Seat Tube is 15" C-C; 17"-ish C-T
Straight gauge tubing.
I'm 5'10", and the bike was designed with my long torso, short inseam, and bendy hips in mind, so J's assessment of the appropriate size range is pretty accurate.
This is a fabulous bike that has served me incredibly well, but I'm just not riding it anymore. It's currently at Halter's.
he is having a hard time letting it go.
before we send it out to the internet at large, I thought someone locally might find it dreamy
This bike is a custom geo, but as I know it intimately I’ll comfortably say that it should be a good fit for a rider between 5-9” and 6’. (Results may vary)
king HS and hubs
Enve bar and rims
ergon grips
fizik alliance saddle
KS dropper post
Niner carbon fork
Thompson stem
xt cranks (w / stages power meter) and brakes
I’ve suggested we say $2500 or best offer
Custom GEO chart to follow.
Further specifics/finer details:
*XT brakes; 180mm rotors f/r
*Chris King threaded bottom bracket, black
*ENVE XC29 rims laced to Chris King ISO hubs, pewter
*ENVE flat bar; 780mm width
*KS Lev dropper; modified to use an air-adjustable cartridge
*100mm front/135mm rear spacing
*Thomson stem is 80mm
*Maxxis Ardents 2.4f/2.25r; some life left in these
*Absolute Black 34t narrow wide ring with Wolftooth bolts
*Wolftooth aluminum 19t cog on there presently; I'll pass along a 17t Wolftooth and 18t & 20t Absolute Black aluminum cogs as well
*Ergon GD-1 grips; these are pretty used up
*Fizik Aliante saddle; I use these on all of my bikes; this one is pretty well-used, haha.
Some geometry:
*Head angle is 71.5
*Seat Tube angle is 72
*Top Tube length is 24.54"
*Seat Tube is 15" C-C; 17"-ish C-T
Straight gauge tubing.
I'm 5'10", and the bike was designed with my long torso, short inseam, and bendy hips in mind, so J's assessment of the appropriate size range is pretty accurate.
This is a fabulous bike that has served me incredibly well, but I'm just not riding it anymore. It's currently at Halter's.
Last edited: