Rear thru-axle compatibility question

[drabina]

I need the following rear thru axle:

148 x 12mm Thru Axle, 174mm length, 1.5 pitch with 15mm thread length

Unfortunately, all stores I have checked so far (including LBS) are out of stock. I know that the measurements are pretty much for a specific rear axle but is there something that could work as a replacement? I found 12mm thread length but the sales rep told me that the thru-axle may not fully lock so he didn't recommend it.

 

[JDurk]

Make and model of the bike and make and model of the hub?
Maybe try here. https://robertaxleproject.com/
Or here. https://www.paragonmachineworks.com/skewers-for-12-mm-polydrops.html

 

[Mr.Moto]

Maybe this. WT info says +/- 2mm so 172 should work.

Wolf Tooth Rear Axle

The Wolf Tooth Rear Axle does more than secure wheels When developing the Rear Axle, Wolf Tooth engineers knew that they wouldn’t be able to get away with any old factory replacement part, even if it was made in Minnesota to aerospace standards. The Wolf Tooth Rear Axle uses a captive steel...

www.wolftoothcomponents.com

 

[drabina]

Will check those links. Thanks.

The bike is 2020 Marin Hawk Hill 1. Not sure about the hub but it is 12x148. I am converting from QR to thru-axle.

 

[Mr.Moto]

Another one..

Salsa Deadbolt Ultralight Thru-Axle, Rear, 12mm Axle Diameter, 174mm Length, 1.5 Thread Pitch, 20mm Thread Length

The Deadbolt Ultralight Thru-Axles are offered in a 6mm flat button head design, for a flush, clean look. Lightweight, easy to use, and secure. <ul> <li>CNC-machined from 7000 series aluminum</li> <li>Designed to fit all current Salsa thru-axle frames</li> <li>For other frames, check...

www.modernbike.com

 

[Mr.Moto]

Took a look at the tech specs and Marin makes it pretty easy to convert with the removeable QR nut. Either of the ones I posted should work.

 

[drabina]

Thanks for all the replies and help. I have ordered the axle from Modern Bike.