Woodworking Tools - Spray System, Vacuum Veneering System

[SmooveP]

Selling off some of my shop equipment. Located in Newton NJ.

Turbinaire HVLP turbine spray system incl. gun - $250
- MiniPro Plus model, sprays primers, topcoats, etc. Variable speed control.
- originally around $900 new with gun
- replaced gun about 5 years ago with Titan Maxum II (these are still available for around $350)
- 15' hose
- Well-used but works fine. Have manuals for turbine and gun.

VacuPress veneering system - $300 firm
- Pro quality vacuum pump and bags can be used for veneering, laminating, forming carbon fiber, etc. Auto shutoff when max vacuum reached. Make your own snowboards or skate decks! Pump alone is around $900 retail.
- 5' x 9' polyurethane bag. Used but great condition. Allows veneering of a 4x8 sheet or smaller bulky shapes. Orig cost $500.
- 12" x 13' polyurethane bag for long work pieces. Often used for laminating spiral stair railing. Used once. Orig cost $250.
- Can also throw in a 4' x 8' platen. This is a piece of 3/4 melamine coated particle board with a grid of saw kerfs that allow the vacuum air to flow inside the bag.
- Includes patch kit for bags, manual.

 

[iman29]

@ebarker9

 

[Norm]

@pooriggy

 

[pooriggy]

@pooriggy

I wouldn't know how to use those tools. My toolbox containers a hammer and adjustable wrench.

 

[SmooveP]

I wouldn't know how to use those tools. My toolbox containers a hammer and adjustable wrench.

I'll teach you. We can make a spice rack.

 

[Karate Monkey]

I wouldn't know how to use those tools. My toolbox containers a hammer and adjustable wrench.

I'm assuming you've seen my hammer:

 

[SmooveP]

I'm assuming you've seen my hammer:

View attachment 255079

Yeah, but you need 2 hammers - standard and metric.

 

[zmartene]

I wouldn't know how to use those tools. My toolbox containers a hammer and adjustable wrench.

I use my adjustable wrench as a hammer and tell myself I'm more efficient. Less tools has to be better, right? 🙃

 

[serviceguy]

I use my adjustable wrench as a hammer and tell myself I'm more efficient. Less tools has to be better, right? 🙃

Selling off some of my shop equipment. Located in Newton NJ.

DeWalt DWE7480 portable table saw - $300 firm
- upgraded Spyder 80t blade
- wheeled stand (the good one)
- barely used, excellent condition

Turbinaire HVLP turbine spray system incl. gun - $250
- MiniPro Plus model, sprays primers, topcoats, etc. Variable speed control.
- originally around $900 new with gun
- replaced gun about 5 years ago with Titan Maxum II (these are still available for around $350)
- 15' hose
- Well-used but works fine. Have manuals for turbine and gun.

VacuPress veneering system - $300 firm
- Pro quality vacuum pump and bags can be used for veneering, laminating, forming carbon fiber, etc. Auto shutoff when max vacuum reached. Make your own snowboards or skate decks! Pump alone is around $900 retail.
- 5' x 9' polyurethane bag. Used but great condition. Allows veneering of a 4x8 sheet or smaller bulky shapes. Orig cost $500.
- 12" x 13' polyurethane bag for long work pieces. Often used for laminating spiral stair railing. Used once. Orig cost $250.
- Can also throw in a 4' x 8' platen. This is a piece of 3/4 melamine coated particle board with a grid of saw kerfs that allow the vacuum air to flow inside the bag.
- Includes patch kit for bags, manual.



View attachment 255050View attachment 255051
View attachment 255052View attachment 255053
View attachment 255054View attachment 255055

Running this with the wife, both spray system and vacuum pump would go greatly with the collection of tools i will probably never use (which obviously includes my bikes).

I already have a table saw but it's not yellow so never say never...

 

[ChrisG]

@The Heckler

 

[Patrick]

Get Matt to buy them then you can borrow em back!

 

[mattybfat]

I may consider the table saw, was always to cheap to spring for this. How many hours would you say is on it?

 

[serviceguy]

Can’t rationally imagine what I would do with any of this, I’ll pass. Sadly.

 

[Mitch]

You retire?

 

[Santapez]

I may consider the table saw, was always to cheap to spring for this. How many hours would you say is on it?

Buy it. I'm almost tempted and I have the 8-1/4" DeWalt. Slightly larger surface, maximum cut and more portable would be nice. And the riving knife is easier to remove on those.

That stand is $200 by itself and he's including a fine finish blade.

 

[SmooveP]

I may consider the table saw, was always to cheap to spring for this. How many hours would you say is on it?

Under 100. It's pretty pristine. Come look.

 

[SmooveP]

You retire?

Yep. Just making spice racks and bird houses for friends now.

 

[mattybfat]

Under 100. It's pretty pristine. Come look.

I will catch you this week

 

[mattybfat]

Yep. Just making spice racks and bird houses for friends now.

PM me your phone number Pat

 

[SmooveP]

Table Saw is sold.