Spokes n Nips advice

[Soundguy]

I need to replace a bunch of spokes on my enduro wheels. I'm completely ignorant when it comes to wheels and hubs and pretty much everything. I figure it should be pretty straight forward to just replace the existing spokes one at a time, but having a hard time figure out sizes and whatnot. Rims are Mavic EN427 27.5 and hubs are F-Type if that's helpful.

 

[serviceguy]

This should give you an idea of the correct length of the spoke. Fist you need t figure out the rim specs and the hub specs,

Spoke length calculator https://spokes-calculator.dtswiss.com/en/

Rim specs (ERD) https://shop.mavic.com/en-us/en-427-disc-j32800.html#1028=3283&1035=3806&1039=3514

and you have to figure out the hub specs (whatever is requested by the spoke calculator, it also explains what the required measurement is). I could not find anything on f type hubs, regardless you need to know offset, pitch circle left/right, flange offset left/right, spoke diameter and hole offset if straight pull.

Or you can measure one of the older spokes...

 

[jklett]

If you decide to just measure spokes, keep in mind that left and right are most likely going to be different lengths for each wheel. You will probably have 4 different lengths of spokes in total for the wheelset.

 

[Soundguy]

Awesome. Thanks guys. I’m going to give it a shot... if it doesn’t work out at least spokes are cheap!