Quiring 29er Ti Hardtail Medium - SOLD

J-Dro

Well-Known Member
Quiring Cycles is a small custom frame builder out of Michigan. This frame was made in 2009 and I have owned it since 2010.
www.quiringcycles.net
https://www.facebook.com/QuiringCyclesLlc?fref=ts

$1100 with this build kit: UPDATE $1000
Quiring Titanium frame size med - brushed matte finish with laser etched logo.
RockShox Reba 120mm fork with through axle.
Stan's Flow EX rims - tubeless.
DT Swiss 340 rear hub
Hope Pro II front hub
Joystick Carbon bar 740mm
Formula 'The One' Brakes
Chris King headset
Chris King bottom bracket
Shimano XT crankset
SRAM X-9 10-spd derailleur Type 2 w/ clutch
RaceFace 32T N/W chainring
Thompson seatpost
Thompson stem

As it sits, the bike weighs 26.3 lbs. I have it built up with bombproof wheels as a fairly burly All-Mountain bike, but the frame is very versatile and could easily shed a few pounds with more XC oriented wheels and/or tires. The frame has very short chainstays for a 29er of this vintage (17.5") and as a result the bike is very lively and flickable. The brushed matte finish holds up very well over time, as any scratches can be buffed out with a gentle scotchbrite pad. The fork was just serviced with new seals in early January and is running buttery smooth. The through-axle fork keeps the front end much stiffer than the QR version when going through the rough stuff.

The only issue to point out is a small hole on one of the inner chainstays (see pic). Shortly after I got the bike, I mounted a 2.4" tire on the rear that had limited clearance. Some mud and stones got caught in the knobs and rubbed against the inner chainstay on 1 side. I've been riding the bike since 2010 when this happened, and it has remained exactly as-is with no signs of weakness. I have full confidence in the strength of the Ti chainstays, but a potential buyer should know.

I also have a front derailleur for this bike if you prefer to run 2x drivetrain.

IMG_20170107_161442564.jpg

IMG_20170107_162231728.jpg IMG_20170107_162245508.jpg IMG_20170107_162252730.jpg IMG_20170107_162335348.jpg IMG_20170107_162426412.jpgIMG_20170107_162441454.jpg IMG_20170107_162447081.jpgIMG_20170107_162610654.jpgIMG_20170107_180722852.jpg
 
Last edited:

extremedave

Well-Known Member
Team MTBNJ Halter's
Jeebus. Holy drool. It's like my mythical fantasy bystickel or Waltworks except ti therefore cooler. Jeff, you and I are similar build how short does the TT feel? I imagine this was built before the long TT short stay trend. Still...
 

J-Dro

Well-Known Member
Jeebus. Holy drool. It's like my mythical fantasy bystickel or Waltworks except ti therefore cooler. Jeff, you and I are similar build how short does the TT feel? I imagine this was built before the long TT short stay trend. Still...

Dave, the top tube measurement is 23.9" and I'm running it with a 90mm stem and a setback post. This combo worked great for me. But I also have longer arms than most people my size, so if anything, the average person might need to tighten up the cockpit a bit.
 
Top Bottom