Post a picture of your next bike part or mtb gear on order!

[Bikeworks]

This Epic Evo frame popped up this morning, so I jumped on it. I am going to port over most of the parts from my Epic HT. I had considered going the Stumpjumper route, but I felt it was too much in the direction of the Enduro as I have it set up, leaving me with two big-travel bikes. Plus, the SJ would've been a helluva lot more to build up (fork, calipers, rotors), so this was a no-brainer. Really excited. Also I am swapping out the suspension for a Rockshox Deluxe Select+, so the stock Fox one will be going up for sale, along with some other stuff I am salvaging from the HT. The HT frame is going to be replaced by Spesh with a factory replacement (SW, L) due to the paint defects, so if you know anyone looking for a XC frame, that will be available as well.

 

[jShort]

Also I am swapping out the suspension for a Rockshox Deluxe Select+

Do you already have the fork? If not, I have a brand new take off from a 2022 Epic Evo…

 

[Bikeworks]

Do you already have the fork? If not, I have a brand new take off from a 2022 Epic Evo…

Yes, I have a SID Ultimate fork on the HT. The rear is what I am swapping out. I put in an offer, but the seller hasn't responded yet.

 

[iLuveketchup]

Nice! I recently bought some Deity Lockjaws and handlebar too. Big fan of Deity.

 

[djm]

RSC

 

[Bikeworks]

Upgrades keep coming. Replacing my Raceface Turbine R with with this.

 

[rick81721]

New mtb shoes day

 

[tonyride]

Pre-ordered.
View attachment 181589

Still waiting....

 

[one piece crank]

May the 4th.... from Poorboysteev

 

[Patrick]

May the 4th.... from Poorboysteev

Solid!

I was watching Picard yesterday and they did an homage to X-Files.

 

[Juggernaut]

So, between the frame being delayed until the new year. 🤬 and SRAM fubar’n rim availability I decided to pivot on project Man-I-Ack. Going with the Revel RW30’s instead. At least those are in stock.

and I just bought a Yelli Screamy to tide me over until the Ti Maniak frame materializes.

 

[gmb3]

So, between the frame being delayed until the new year. 🤬 and SRAM fubar’n rim availability I decided to pivot on project Man-I-Ack. Going with the Revel RW30’s instead. At least those are in stock.
View attachment 184184


and I just bought a Yelli Screamy to tide me over until the Ti Maniak frame materializes.

View attachment 184185

Selling Old Yelli when Maniak comes? DIBS!

 

[Victor I]

Yes, I have a SID Ultimate fork on the HT. The rear is what I am swapping out. I put in an offer, but the seller hasn't responded yet.

Have the Sid Ultimate on one of my bikes. Love it. Firm and solid but not harsh.

 

[Victor I]

So, between the frame being delayed until the new year. 🤬 and SRAM fubar’n rim availability I decided to pivot on project Man-I-Ack. Going with the Revel RW30’s instead. At least those are in stock.
View attachment 184184


and I just bought a Yelli Screamy to tide me over until the Ti Maniak frame materializes.

View attachment 184185

Tried out a Canfield HT at Stewart a couple of weeks ago. Great geometry and well balanced. Also fun which is what bikes are about. Can hardly wait to see the build!

 

[Juggernaut]

Holy crap, it’s here already. 😁

 

[mattybfat]

Holy crap, it’s heat already. 😁
View attachment 184308

View attachment 184307

Sweet! Love my Nimble9
Seems Hardtail Party certainly loved it.
Enjoy!

 

[iman29]

Well I certainly didn’t order these but it’s great when a buddy upgrades his gravel wheels and donates these so I can have a 2nd set for riding the gravel bike with road tires. !!

Even includes cassette and rotors ! Winning

 

[Glenn Rides After 4 PM CST]

RANGE HANDLEBAR GEN 3

The Range Handlebar Gen 3 remains hyper-focused on ergonomics and comfort, adding a 35mm diameter option and a standard 800mm width across both sizes. With the industry continually trending towards frames with longer reach, the Range minimizes back discomfort and wrist fatigue to keep you comfy...

www.pnwcomponents.com

I'm removing all Carbon bars from my MTBs. Starting with the Occam.

 

[JDurk]

RANGE HANDLEBAR GEN 3

The Range Handlebar Gen 3 remains hyper-focused on ergonomics and comfort, adding a 35mm diameter option and a standard 800mm width across both sizes. With the industry continually trending towards frames with longer reach, the Range minimizes back discomfort and wrist fatigue to keep you comfy...

www.pnwcomponents.com

I removing all Carbon bars from my MTBs. Starting with the Occam.
View attachment 184448

Curious about removing all carbon bars. Seems adding is considered an upgrade.

Full disclosure: All my bikes have carbon except the new Pivot which is still OEM alum.

 

[Glenn Rides After 4 PM CST]

Curious about removing all carbon bars. Seems adding is considered an upgrade.

Full disclosure: All my bikes have carbon except the new Pivot which is still OEM alum.

It's a comfort thing. Yes Carbon is lighter and claim to have flex built in. I don't think they bend as much as they claim. My hands and forearms are killing me after a ride. I had aluminum on all my previous bikes.