Niner JET 9 NINE Closeout

jdog

Shop: Halter's Cycles
Shop Keep
I have a handful of Niner Jet Nine Frames and COMPLETES that are available for a quick sale.

Most all sizes and colors (green or BBQ Black)

This is a short time deal

For New frames $1499

For USED Completes (built w/ X9 kit, Stan's rims, Fox Fork..etc)

$2800 used. (List for $4300 new)

These used bikes have less than 20 hrs on each and they will be warrantied as new.

Here is what is on the demo bikes:

-Fox F100 RL 100mm
-FSA Orbit 1 1/8" Sealed Cartridge Bearing headset
-Race Face Evolve Seatpost, 30.9 x 350mm
-Stans ZTR Arch Rims, 29er rim, disc only, 32H
-WTB LaserDisk -WTB LaserDisk Superlight, 32H, Sealed Cartridge Bearings, alloy axle, 9-speed, 135mm
-Double Butted 14/15G, w/ RED ALLOY NIPPLES 14x12mm
-Sram PC-971 Chain, 114 Link w/ Gold Power link
-Truvativ Stylo 3.3 TM cranks, 22, 32, 44 front crankset for 68mm bb shell.
170mm for small, 175 for m/l/xl
-Sram PG-970 11-34 cassette
-Shimano XT FD-M771 front derailleur, 34.9 clamp dual pull
-Sram X-O medium cage rear derailleur
-Sram X-9 shifters
-Jagwire shifter cables
-WTB PureV Race SL saddle
-Race Face Evolve stem, 31.8 Clamp diameter 70mm S, 90mm M, 100mm L, 110mm XL
-Niner Flat Top9 bar, 710mm width, 31.8 clamp, 9 degree bend
-WTB Weirwolf grips
-WTB Prowler tires
-Juicy 7 front brake
-Juicy 7 rear brake


Jump on this as they will be available on a bigger scale (out of NJ) after today.


You snooze you loose on this one..

$500 deposit to get it going. Pay off the rest when you can.


J)
 
Last edited by a moderator:

jdog

Shop: Halter's Cycles
Shop Keep
This is the Complete Demo (S) in question.



NinerJet9demo.jpg
 

jdog

Shop: Halter's Cycles
Shop Keep
Also..

Just found out that there are also some hardtails.


EMD's For $1499 (used for 2 days each) Completes

Mcr's for $1799 (same deal)

These will all go really quick.

I will have spec on the hardtail parts soon. The build kits are usually solid on Demos as they are trying to win you over..


j
 
N

NJCorky

Guest
OK, now you're just killin us! Hurry, get specs.......can't wait any longer.....:drooling:

Did you get to ride the mcr or emd? Any noticable difference between the 853 and the aluminum?
 

olegbabich

Well-Known Member
I would love to get Niner RIP 9, but although my wife says;” go for it”, I just can not justify having 4 bikes right now. I would have to sell one or trade one in for some Tuna.
 

jdog

Shop: Halter's Cycles
Shop Keep
I would love to get Niner RIP 9, but although my wife says;” go for it”, I just can not justify having 4 bikes right now. I would have to sell one or trade one in for some Tuna.

Come grab that demo that you saw the other day.

I just grabbed a Jet 9 for the shop too.. I should have it next week.

j-
 

olegbabich

Well-Known Member
You are like a bike pusher:D. First taste is free, but then you have to pay.
I have to figure out the amount of coin I need for X-Mas, ski trip out West and wife's new kitchen cabinets. But we will see:hmmm:.
Just tell me what am I gonna do with my other full suspension bike?
 

jdog

Shop: Halter's Cycles
Shop Keep
Also..

Just found out that there are also some hardtails.


EMD's For $1499 (used for 2 days each) Completes

Mcr's for $1799 (same deal)

These will all go really quick.

I will have spec on the hardtail parts soon. The build kits are usually solid on Demos as they are trying to win you over..


j

SO.. The Hardtails have the same spec as the Jet 9's w/ the exception of a reba u-turn fork instead of a fox fork.

I am trying to get the guys to take a picture today as well.

Now who is in??

j-
 

jdog

Shop: Halter's Cycles
Shop Keep
You are like a bike pusher:D. First taste is free, but then you have to pay.
I have to figure out the amount of coin I need for X-Mas, ski trip out West and wife's new kitchen cabinets. But we will see:hmmm:.
Just tell me what am I gonna do with my other full suspension bike?

I will sell it on E-bay for you if need be.

j-
 
Top Bottom