Eagle GX Cassette wear

[Mr.Moto]

Shit I have 800 plus on my SJ

Fire and new bike. Or sell for pennies on the dollar to @Paul H

 

[Mathers]

Is this bad ?it seems to run fine. Sorry for the thread jack Dave02

 

[stb222]

Is this bad ?it seems to run fine. Sorry for the thread jack Dave02View attachment 103600

Check the chain with a checker, if it is past due, may have killed the cassette and chainring. You will know if you put a new chain on and it starts skipping or grinding.

I worn chain will run fine in what it wore into.

 

[Paul H]

Dammit! My chain checker only checks .75 and 1

 

[Dave02]

Is this bad ?it seems to run fine. Sorry for the thread jack Dave02View attachment 103600

It's hard to judge a cassette as the teeth are not all uniform. Check the chain for stretch. A cassette will last quite a few chains before wearing out.
In my cassette, you can see that the chain is not properly engaged.
To me, your cassette looks good.
That comes from the guy that didn't set the B screw properly, though.....

 

[Steve Vai]

If the b tension isn't right, the gap from the upper pulley and bottom of the 50t will be off and force the chain to sit just off of the teeth. When you pedal it will seat right in, but off the bike it will do what you see.

 

[jShort]

If the b tension isn't right, the gap from the upper pulley and bottom of the 50t will be off and force the chain to sit just off of the teeth. When you pedal it will seat right in, but off the bike it will do what you see.

Lol... Why would they listen to you? Stop making sense damnit!

 

[Magic]

If the b tension isn't right, the gap from the upper pulley and bottom of the 50t will be off and force the chain to sit just off of the teeth. When you pedal it will seat right in, but off the bike it will do what you see.

 

[Steve Vai]

Lol... Why would they listen to you? Stop making sense damnit!

Not I only am I a mechanic, but I also WORK for Sram!! Lol.

 

[Dave02]

Thanks Jim- always appreciate your insight!