The DIY thread - DIYourself

[shrpshtr325]

Crossthreading is more effective than loctite.
Just sayin'

yes it is, rounded out the flats on it last time i had the system open to flush the fluid, replaced the caliper this time around :/ not a bad job, just something i didnt want to have to do. and a good excuse to put the stainless lines on

 

[rick81721]

yes it is, rounded out the flats on it last time i had the system open to flush the fluid, replaced the caliper this time around :/ not a bad job, just something i didnt want to have to do. and a good excuse to put the stainless lines on

Thought you were ditching the challenger for a viper??

 

[shrpshtr325]

Thought you were ditching the challenger for a viper??

i would love to, but i need to to accumulate more cubes of $$$$ first. challenger is still a blast to drive in the meantime tho.

 

[Patrick]

Prepping the grounds for dropping the treeView attachment 90447

i can tell you which way it wants to go, and it isn't towards the camera!
gunna limb it first? maybe top it too?

 

[serviceguy]

i can tell you which way it wants to go, and it isn't towards the camera!
gunna limb it first? maybe top it too?

Whatever he does he better doing it on camera! The potential to make the 'tree cutting fails' YouTube compilation is very high there!

 

[A Potted Plant]

i can tell you which way it wants to go, and it isn't towards the camera!
gunna limb it first? maybe top it too?

A wise man once told me, "Get the fuck off that tree." I'm letting the pros do this one

 

[serviceguy]

A wise man once told me, "Get the fuck off that tree." I'm letting the pros do this one

Nevertheless, get it on camera.

 

[A Potted Plant]

Nevertheless, get it on camera.

I hope they fuck something up that fence needs to be replaced I broke the slots

 

[serviceguy]

Fight Club rules should apply...

 

[mattybfat]

Plastic fences are complete garbage, that's all I got.

 

[shrpshtr325]

A wise man once told me, "Get the fuck off that tree." I'm letting the pros do this one

not sure why this is in DIY thread then . . . . .

 

[serviceguy]

not sure why this is in DIY thread then . . . . .

because of the take down of the fence was DIY, just guessing...

Also, @Miracle Max Loves Garbage can you film the explosion of the new-to-you air compressor? Ironically that is what may happen to me since I'll be fixing my compressor later on...

 

[shrpshtr325]

because of the take down of the fence was DIY, just guessing...

Also, @Miracle Max Loves Garbage can you film the explosion of the new-to-you air compressor? Ironically that is what may happen to me since I'll be fixing my compressor later on...

you also need to film your repair then!

 

[serviceguy]

you also need to film your repair then!

I'm shy...

 

[A Potted Plant]

not sure why this is in DIY thread then . . . . .

I took the fucking fence down lol, if its not 105% rot I will slab it up here with my chain saw.

 

[A Potted Plant]

because of the take down of the fence was DIY, just guessing...

Also, @Miracle Max Loves Garbage can you film the explosion of the new-to-you air compressor? Ironically that is what may happen to me since I'll be fixing my compressor later on...

do you need parts I've got another compressor I'm cutting up.

 

[serviceguy]

do you need parts I've got another compressor I'm cutting up.

I'd rather buy new parts to be honest. But thanks.

 

[A Potted Plant]

I'd rather buy new parts to be honest. But thanks.

np, if you need a regulator or a motor they're there the tank I wont be giving away, its not safe

 

[02camaro]

Friend said jeep was making a horrible noise. Throw out bearing was the diagnosis, upon trans removal, ball bearings and parts fell out. A New clutch and bearing the jeep still jeeps

 

[A Potted Plant]

Friend said jeep was making a horrible noise. Throw out bearing was the diagnosis, upon trans removal, ball bearings and parts fell out. A New clutch and bearing the jeep still jeeps
View attachment 90552View attachment 90553View attachment 90554

its a jeep thing, I don't want to understand