2020 YT Capra Race Pro 29 - Large (w/ RideWrap) - $2900

HWMTB

New Member
FOR SALE: 2020 YT Capra Race Pro 29 (L) w/ RideWrap - $2900

This enduro bike is used but mechanically sound! It has been RideWrapped since I purchased it in 2020. The pictures will show some wear in the wrap but the frame is free of deep gouges and cracks. There are two pea-sized chips on the non-drive side chain stay (pictured) but the carbon is otherwise intact and sound. As for the wrap pieces that are worn, I have new RideWrap available if you want it. This Capra has been stored in my climate controlled bike room (aka dining room). I'm selling it because I've since upgraded and it's not getting used. The sale of this bike would help with the N+1 formula. This bike was not used during the 2023 season! So, since the used market tanked, I figured now is a great time to sell it. 🤦‍♂️

Asking $ 2,900. (Sorry, I don't have Venmo so cash would be preferred.) Local pick-up/delivery also preferred. More pictures are available upon request.

About the seller: I'm a local rider (Allaire, Hartshorne) and I've been a member of the MTBNJ forums for several years but not very active. Need references? I'm sure a few of the active members can vouch for me?

SPECIFICATIONS (FROM YT) with my Comments in ORANGE

Frameset
  • Frame: High modular carbon fiber; [Tailored RIDE WRAPPED - down tube, seatstay, and chainstay protection]
  • Fork: FOX 36 FLOAT Factory, 44mm offset, 15x110 Boost axle, 170mm travel [Photos will show small scratch in Kashima coating]
  • Shock: FOX X2 FLOAT Factory, 2-position lever, 230mm x 65mm, 170mm travel [I'm told there is air bubble in the shock but otherwise works normally. Last serviced in 2022]
Wheels
  • Hubs: e*thirteen LG1 Race EN wheelset, 110x15mm Boost front, 148x12mm Boost rear
  • Wheels: e*thirteen LG1 Race EN Carbon, 30mm inner width
  • Wheel Size: 29"
  • Spokes: e*thirteen LG1 Race EN wheelset
  • Tires: MAXXIS Minion DH 29 x 2.3 (Rear) & Assegai 29 x 2.5 (Front) [Ready for the season! Plenty of life left in the tread!]
Drivetrain
  • Chain: 435mm, e*thirteen TRS+, compact slider upper guide [missing] with bashguard
  • Chainring: Truvativ Descendant Eagle, 32 tooth, [I changed it to a SRAM 30-tooth Eagle chainring]
  • Crank: Truvativ Descendant Carbon Eagle DUB, 170mm length, Boost
  • Bottom Bracket: 25mm drop, 15mm drop, SRAM DUB
  • Rear Derailleur & Shifters: SRAM X01 Eagle, 12-speed
Components
  • Brakeset: SRAM Code RSC, SRAM 200mm CenterLine rotors, SRAM Code RSC
  • Handlebar: Renthal Fatbar Carbon, Black, 35mm bore, 30mm rise, 800mm width
  • Saddle: SDG Radar MTN, YT Custom
  • Seatpost: FOX Transfer Factory 150mm Dropper, 31.6mm, Single bolt, 31.6mm, Single bolt [Photos will show small scratch in Kashima coating and, yes, it sticks on occasion.]
  • Stem: Renthal Apex, 35mm clamp, 50mm length
  • Grips: ODI Elite Motion V2.1, lock-on
  • Headset: ACROS AZX-576, High Cap
---------------------------
EDIT 2/19/2024: Fixed a couple typos.
 

Attachments

  • IMG_0867.JPEG
    IMG_0867.JPEG
    121 KB · Views: 34
  • IMG_0880.JPEG
    IMG_0880.JPEG
    137.9 KB · Views: 33
  • IMG_0875.JPEG
    IMG_0875.JPEG
    91.8 KB · Views: 29
  • IMG_0873.JPEG
    IMG_0873.JPEG
    52 KB · Views: 28
  • IMG_0874.JPEG
    IMG_0874.JPEG
    113.3 KB · Views: 27
  • IMG_0876.JPEG
    IMG_0876.JPEG
    65.4 KB · Views: 24
  • IMG_0871.JPEG
    IMG_0871.JPEG
    72.3 KB · Views: 23
  • IMG_0870.JPEG
    IMG_0870.JPEG
    60.4 KB · Views: 20
  • IMG_0881.JPEG
    IMG_0881.JPEG
    102.4 KB · Views: 31
Last edited:
Back
Top Bottom